HDClone Professional v3.2.8 + Serial

Creating identical 1:1 copies of hard disks and other media. For data rescue, backup, system restoration, mass installations and many more...



HDClone copies the entire contents of hard disks and other IDE/ATA, SATA/eSATA, SCSI, USB, and Firewire media on a physical level. This even allows for the smooth creation of backups or copies of complete operating system installations. In combination with the special 'SafeRescue' mode of HDClone, this technique is also perfect for rescuing data in case of defective hard disks. Furthermore, HDClone works independent of a partition layout, file system and operating system (i.e. it works with FAT, FAT32, NTFS, etc.). Thus, it also works with proprietary data formats which could not be accessed otherwise. Besides copying complete drives, it is also possible to apply it to certain partitions only.

Hardware Requirements:
# PC Pentium or higher, 32 MB RAM, VGA
# bootable floppy drive or CD/DVD
# PCI IDE hard disk controller

# optional: Busmaster IDE controller
# optional: USB 1.1 (UHCI, OHCI)
# optional: USB 2.0 (EHCI)
# optional: Adaptec SCSI controller
# optional: AHCI (SATA II) controller
# optional: Firewire / IEEE1394 (OHCI)

The Professional Edition of HDClone is conceived for daily use. For this purpose, it offers technicians, professional and private users the highest possible speed and flexibility through its 'FastCopy' mode and the 'Sector area' option which allows you to define an arbitrary copying area on the medium.

Besides IDE/ATA and SATA/eSATA hard disks and USB Mass Storage devices (hard disk, stick, card reader) via USB 1.1 and 2.0., HDClone Professional Edition also supports SCSI hard disks* and Firewire (IEEE1394) mass storage (SBP2) devices, e.g. an external hard disk or a card reader. The Professional Edition copies up to 5,4 GB/min and more.


INSTALLATION:
You can build a bootable program floppy disk or CD/DVD
with this software package by doing the following:

WINDOWS 9x/Me/NT/2000/XP
Extract the files of the package into a directory
of your choice and use INSTALL.EXE to create a
bootable floppy disk or CD/DVD.

UNIX/Linux
This package contains a floppy image (HDCLONE.IMG)
and an ISOimage (HDCLONE.ISO). From these you can
create a bootable medium under most Linux systems
by doing the following:
At first, extract the software package to a folder
of your choice. From there, open a terminal window
and use one of the following commands:
- Bootable floppy: "dd if=hdclone.img of=/dev/fd0" or
"dd if=hdclone.img of=/dev/floppy"
- Bootable CD/DVD: "cdrecord hdclone.iso"

OTHER OPERATING SYSTEMS
This package contains a floppy image (HDCLONE.IMG)
and an ISOimage (HDCLONE.ISO). Use an appropriate
program to write them on floppy disk or CD/DVD.

You find further information for building a bootable
floppy disk or CD/DVD in the detailed manual (see below).

PROGRAM STARTUP:
Insert floppy disk or CD/DVD into a bootable drive and
restart the computer. Ensure in the BIOS that it will boot
from this drive. HDClone will then be loaded automatically
when starting the PC.

1 komentar
  1. Imam W. 15 Oktober 2011 07.22  

    udah didelete gan